Quilter's Ruler Holder
Solid Maple holder to organize all your Quilting rulers and keep them handy for immediate use.
These holders are 13, 14, 16, or 18 inches long by 5 1/2 inches wide and 1 inch thick. Each holder has 7 slots for rulers. Each slot is just over 3/16 inch wide by 3/8 of an inch deep. There is a 3/8 inch gap between each slot.
There are rubber feet on each of the boards for stability and to keep it from sliding.
The 18 holders are offered in Curly Maple. The 14 and 16 inch rulers are a more classic Maple grain. All the holders are finished with a semi-gloss glass smooth finish.
Q. How are the cutting boards finished?
A. All boards are individually flattened and sanded smooth. They are then treated with several coats of cutting board oil.
Q. How should the board be cleaned?
A. Wash the board with warm soapy water, rinse, and dry immediately. Let the board stand vertically in place with good are circulation. Never put a wood cutting board in the dishwasher!
Q. Is there any special treatment required for a cutting board?
A. All wood cutting boards should be treated with a good cutting board oil monthly, or more frequently if used regularly. Mineral oil will work – but I would recommend treatment with an oil specifically formulated for wood boards. There are a number of good ones available. They can be found in Lowes, Home Depot, most local woodworking stores, or many are available online.
Q. What if my board is showing significant signs of wear?
A. Over time all boards will show some signs of wear. If used primarily as a cutting board it will obviously pick up scratches and marks. As long as it is kept clean and oiled these should cause no functional problems. Boards can also be sanded to restore a newer look.
Q. Can feet be added to the board?
A. Yes, although experience has shown that many people like to use one side for cutting and work, then flip the board and keep one side unblemished for display. If feet are wanted I can add them.